AR72.10-W-2400D | Remove/install outside door handle on front door | 26.6.07 |
MODEL 930.0 /1 /2 /3, 932.0 /1 /2 /3, 933.1 /3, 934.0 /1 /2 with BODY 943.899
W72.10-1022-06
1 Screw
2 Actuation linkage
3 Actuation linkage
4 Door handle
5 Safety clamp
6 Anti-theft alarm system$
Modification notes
| Remove/install | ||
1 | Remove anti-theft alarm system (6) from bolt (1) | ||
2 | Unscrew bolt (1). | ||
3 | Slide door handle (4) toward front (arrow A) and pull out of door (arrow B). | ||
4 | Unclip safety clamps (5) from actuation linkage (2, 3) and unhook actuation linkage (2, 3) from door handle (4), remove door handle (4). | Mark installation position of actuation linkage (2, 3) before unhooking. | |
Installation: Install door handle (4) taking care to ensure that it is not under tension. Observe marking on actuation linkage (2, 3). | |||
| |||
5 | Disconnect electrical connector behind door handle (4) | Only on driver door on vehicles with code (FZ3) Convenience locking system with remote control or with code (FZ8) Anti-theft alarm system (ATA) without interior protection. | |
6 | Install in the reverse order |
Mounting wedge
110 589 03 59 00