S72.10-2506-09
1 Door lock
2 Window guide
3 Mounting screws
6 Position sensor
7 Position sensor
4 Retaining bracket
5 Mounting screws
| Removal, installation | ||
1 | Remove front door liner | ||
2 | Carefully detach door foil | ||
3 | Remove outer door handle on front door | ||
4 | Unhook control cable | Swing retaining bracket (4) down through door handle opening in door panel and pull control cable out of mount | |
5 | Detach window guide (2) at bottom | Screw behind window guide | |
6 | Unscrew mounting screws (3) for door lock (1) | ||
7.1 | Unscrew mounting screws (4) for central locking motor | Only with code FZ0 or FZ1 | |
8.1 | Remove position sensors (6, 7) | Only with code FZ0 or FZ1 Swing position sensor back. Remove wires from cable guide while paying attention to holders | |
9 | Remove door lock (1) | ||
10 | Reinstall in opposite order |