ar7210s1016p

Replace decorative foil on font door window frame

Type ar · emne 72.10 · version 0100 · 2017-10-04

Gælder for: Model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 72 Døre › 72.10 Fordør — Serie 470 · Serie 471

EinPAS 40 Konservering/lakering › 40.15 Lakering/lakpleje › 40.15.30 lakpleje/krompleje/folier/transportbeskyttelse — Serie 470 · Serie 471

AR72.10-S-1016P

Replace decorative foil on font door window frame

17.05.2017

Model

470, 471

Replace decorative foil on font door window frame

Shown on left front door (2)

1

Decorative foil

2

Front door

3

Outer sealing rail

4

Window guide seal

S72.10-4648-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove

1

Fully open side window of front door (2)

2

Remove sealing rail EXT (3) from front door (2)

AR72.10-S-1700P

3

Detach window guide seal (4) in area of decorative foil (1) from window frame

4

Heat decorative foil (1) with heat gun and remove from front door (2)

000 588 00 84 00 Heat gun

WS54.00-P-0049B

5

Clean bonding surface on front door (2)


The bonding surface must be completely clean and free of grease.
Adhesion defects can otherwise arise.

Cleaner

*BR00.45-Z-1025-04A

Install

6

Remove protective foil from new decorative foil (1)

7

Align decorative foil (1) on bonding surface and attach


Gradually attach decorative foil (1) and at the same time smoothen with a doctor blade.
Air bubbles can otherwise be trapped under decorative foil (1).

8

Secure window guide seal (4) on front door (2)

9

Install outer sealing rail (3)

AR72.10-S-1700P

10

Close side window of front door (2)

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Henviste dokumenter