P72.10-2047-06
1 Door lining
2 Mirror triangle cover
3 Entrance lamp
4 Wooden surround
5 Screws
6 Cover
7 Screw
8 SRS cover (with code 292 front side airbag)
9 Screw
(with code 292 front side airbag)
10 Lock escutcheon
11 Control cable
| Removing, installing | ||
1 | Open crank window | ||
2 | Unclip mirror triangle cover (2) from above using assembly wedge, pull upwards and remove | | |
3 | Unclip entrance lamp (3), disconnect electrical connection and remove entrance lamp | ||
4 | Unclip wooden surround (4) on the front side (arrow) with extractor hook, push forwards and remove. | Installation: Ensure that the rotating bars are horizontal. | |
| |||
5 | Disconnect switch group connectors | ||
6 | Unscrew screws (5) in the area of the front door handle | ||
7 | Unclip cover (6) on armrest and unscrew screw (7) | ||
8 | Unclip SRS cover (8) and unscrew screw (9) | With code 292 (front side airbag) | |
9 | Detach lock escutcheon (10) | ||
10 | Press door lining (1) on the inner door panel at bottom, front and rear using assembly wedge | Guide each assembly wedge straight to the clips. | |
11 | Lift door lining (1) out of retaining clips at the top of the sealing rail using assembly wedge and at the same time pull away from the inner door panel | | |
12 | Unhook control cable (11) on interior door control | ||
13 | Remove door lining (1) and put down on clean base | ||
14 | Check film and clips on inner door panel and replace if necessary. | Stick door film onto inner door panel. | |
15 | Check clips on door lining (1) and replace if necessary. | ||
16 | Install in reverse order |
140 589 02 33 00
Extractor hook
Assembly wedge
110 589 03 59 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1004-02A | Adhesive PVC 914 | A 001 989 30 71 |