Remove/install door lining on front door

AR72.10-P-1000N

Remove/install door lining on front door

28.1.99

 

Remove/Install

 Danger!

Danger when processing magnesium components

AS60.00-Z-0005-01N

1

Press cover (10) off with mounting wedge (11)

*110589035900

2

Unscrew bolts (3) from cover (2) and remove cover (2)

3

Unscrew bolt (5) from rosette lock (4) and remove it (4)

4

Remove covers (6) and unscrew bolts (7) below

5

Unscrew bolt (15) from ventilation grille (12) and remove ventilation grille (12)

6

Press locking rail for door control unit cover (13) toward rear in direction of arrow and unlock door control unit cover (13).

7

Disconnect connectors from left/right door control unit (N69/1, N69/2) and remove door control unit cover (13) together with left/right door control unit (N69/1, N69/2)

8

Unlock release lever (8) in direction of arrow

 Installation: Ensure that the release lever (8) arrests on the inner door panel (16).

9

Press door lining (1) off of inner door panel (16) with mounting wedge (11)



 Move mounting wedge (11) directly onto the clip retainer (9) and ensure that the retainer tabs of clip retainer (9) do not tear out of the door lining (1).

*110589035900

10

Lift door lining (1) out of retaining clips at top of sealing rail with mounting wedge (11) and simultaneously remove from inner door panel (16).



*110589035900

11

Unhook Bowden cable from inside door opener

12

Check door foil and clip retainers (9)

Replace damaged door foil and clip retainers (9).

13

Install in the reverse order

 Installation: Remove clip retainers (9) remaining on inner door panel (16) and install at corresponding point of door lining (1).