AR72.10-P-1000MC | Remove/install door lining on front door | 16.3.01 |
MODEL 220.174 /175 /176 /178 with CODE (Z04) Light armoring
P72.10-2333-09
Shown on model 220 up to FIN: 316716
1 Bolts
2 Trim strip
3 Door handle cover
4 Cover
5 Bolts
12 Bolt
13 Mounting clips
14 Door lining
N69/1 Left front door control unit
N69/2 Right front door control unit
6 Door control unit cover
7 Bolt
8 Lock rosette
9 Bolt
10 Bolt
11 SRS cover
P72.10-2728-07
Shown on model 220 As of VIN: 316717
6 Door control unit cover
15 Door opener cover
2 Trim strip
5 Bolts
| Remove/Install | ||
1 | Unscrew bolts (1) | ||
2 | Remove trim strip (1) from door control module cover (6) | | |
3.1 | Remove cover for door handle (3) | Up to VIN :316716 | |
| |||
3.2 | Remove door opener cover (15) | As of VIN: 316717 | |
| |||
4.1 | Unclip cover (4) | Up to VIN :316716 | |
| |||
5 | Unscrew bolts (5). | ||
6 | Press door control module cover (6) off of door lining (14) | | |
7 | Disconnect connector from left front door control module (N69/1) or right front door control module (N69/2) and remove door control module cover (6) | ||
8 | Unscrew bolt (7) and remove lock rosette (8) | ||
9 | Unscrew bolt from door handle (9) | Installation: Install bolt (9) with washer. | |
10 | Unclip SRS cover (11) and unscrew bolt (10) | ||
11 | Pry off door lining (14) from door panel | Move mounting wedge directly to mounting clips (13), otherwise the retaining tabs for the mounting clips (13) can tear out of the door lining (). | |
| |||
12 | Unhook cable from inner door opener | ||
13 | Disconnect connector from door lining (14) and lay down door lining (14) | Remove mounting clips (13) remaining on door panel and insert at corresponding position on door lining (14) | |
14 | Check door foil and mounting clips (13) | Replace damaged mounting clips (13). | |
Replace door foil, see | |||
Remove/install front door foil | |||
Model 220.175/178 | |||
15 | Install in the reverse order |
Mounting wedge
110 589 03 59 00