Remove/install front door lining

AR72.10-P-1000MB

Remove/install front door lining

7.11.06

 

Remove/install

1

Press trim strip (1) off of door control unit covering (2).



*110589035900

2.1

Remove door opener cover (18)

As of vehicle identification end no.: 316717



*110589035900

3

Remove bolts (3)

4

Press door control unit covering (2) off of door lining (10)



*110589035900

5

Disconnect electrical connector from left front door control unit (N69/1) or right front door control unit (N69/2) and remove door control unit covering (2).

6.1

Remove door handle cover (9) from door handle

Up to vehicle identification end no.: 316717



*110589035900

7.1

Remove covering (5) from door handle

Up to vehicle identification end no.: 316717



*110589035900

8

Unscrew bolts (6, 7) from door handle

9

Take off cover (8)

10

Unscrew bolt (4)

11

Unscrew bolt (11) from lock cover plate (12) and remove lock cover plate (12)

12

Unscrew bolts (13) from trim (15) and remove trim (15) downward

13

Remove bolts (17)

14

Press door lining (10) off of inner door panel and remove upward.

 Move assembly wedge (14) directly to mounting clips (16), otherwise, the retaining tabs for the mounting clips (16) can tear out of the door lining (10).



*110589035900

15

Unhook operating cable from inside door opener

16

Disconnect electrical connector on door lining (10) and lay down door lining (10).

17

Check door foil and mounting clips (16), replace door foil if necessary.

 Installation: Remove mounting clips (16) remaining on the inner door panel and install at corresponding position on door lining (10). Replace damaged mounting clips (16).

18

Install in the reverse order