D72.10-1112-06
1 Plug connector
2 Connector plug (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)
3 Bolt (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)
4 Screw
5 Bolts
6 Door holder
7 Sealing foil
H4/25 Bass midrange speaker (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)
H4/26 Bass midrange speaker (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)
N69/1 Driver door control unit
| Remove/install | ||
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
1 | Remove door trim | ||
2 | Disconnect connector plug (1) and unclip driver door control unit (N69/1) | ||
3 | Remove connector plug (2) and remove bass midrange speaker | with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear | |
4 | Carefully remove sealing foil (7) partially from door | Remove sealing foil (7) until door holder (6) is accessible. | |
Installation: Replace damaged sealing foil (7). | |||
5 | Unscrew door holder (6) from A-pillar | Installation: Install new self-locking bolt (4) | |
| |||
6 | Unscrew door holder (6) from door | Installation: Replace self-locking bolts (5). | |
| |||
7 | Install in the reverse order |
Hinged doors
Henviste dokumenter
- ar7215d2150e
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele