ar6850p3000rg

Remove/install trunk retractable partition

Type ar · emne 68.50 · version 0101 · 2017-05-13

Gælder for: Model 190.3

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.50 Gardiner, rullegardiner, bagagenet, fastgørelse af last — Serie 190 (modeller 3**)

EinPAS 37 Indvendigt udstyr › 37.57 Lysbeskyttelse › 37.57.31 rullegardin/gardin — Serie 190 (modeller 3**)

AR68.50-P-3000RG

Remove/install trunk retractable partition

16.02.2017

Model

190.3

Remove/install trunk retractable partition

1

Trunk partition

2

Bolts

P68.50-2633-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on sensor system for trunk lid opening/closing

AH80.61-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Remove center paneling in trunk

AR68.30-P-4810RG

3

Remove screws (2) on left and right

4

Remove trunk partition (1)

Installation: Ensure that rear wall paneling in guide rail of trunk partition (1) is seated correctly.

5

Install in the reverse order

Henviste dokumenter