Remove/install inside rearview mirror

AR68.40-P-0001MFA

Remove/install inside rearview mirror

01.04.2019

Model

118, 177, 247

Modification notes

29.03.2019

New operation step added.

Operation step 7

1

Cover

2

Cover

3

Electrical connector

4

Mirror base

A67

Inside rearview mirror

 Warning

Risk of injury caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens.

Wear protective gloves and safety glasses.

AS60.00-Z-0008-01R

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Perform commissioning of garage door opener.

Model 118, 177, 247
with code 231 (Garage door opener)
Model 118, 177, 247
with code 232 (Garage door opener)
When replacing inside rearview mirror (A67).

Notes on programming garage door opener transmitter unit

AH68.05-P-0002-01A



AD00.00-P-2000-06MFA

2

Unclip cover (1) (arrows) and remove.

 Long wedge

*115589035900

3

Unclip cover (2) from mirror base (4).

4

Release and disconnect electrical connector (3) and guide electric line out of mirror base (4) (arrow B).

If installed.

5

Turn inside rearview mirror (A67) on mirror base (4) with suitable open-end wrench and remove from mirror bracket.

 The mirror base (4) can be turned in both directions.



Check

6

Check catch hooks of cover (1).

If damage is present,



Replace cover (1).

7

Check catch hooks of cover (2).

If damage is present,



Replace cover (2).

8

Install in the reverse order

Adjust

9

Adjust inside rearview mirror (A67) to steering variant.

When replacing inside rearview mirror (A67).

Model 118, 177, 247
with code 231 (Garage door opener)
Model 118, 177, 247
with code 232 (Garage door opener)
Model 118, 177, 247
with code U62 (Exterior light and sight package)

AR68.40-P-0001-01MFA