AR68.30-W-4750C | Removing and installing rear wall trim | 19.11.97 |
MODEL 375.1 with BODY 375.830 with CODE (F07) S-cab (short)
MODEL 375.3 with BODY 375.810 with CODE (F07) S-cab (short)
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 with CODE (F07) S-cab (short)
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (F07) S-cab (short)
W68.30-0018-06
1 Left stowage compartment
2 Philips screw
3 Philips screw
4 Right stowage compartment
5 Center stowage compartment
6 Philips screw
W68.30-0019-06
7 Rear wall paneling
8 Vent nozzle
9 Plastic grub screw
10 Curtain rail
11 Coat hook
12 Philips screw
13 Edge bow
14 Philips screw
15 Torx screw
16 Grab handle
17 Door seal
18 Cover
19 Cover
20 Plastic anchor
| Removal, installation | ||
1 | Fold rear seat backrests forward and move seats completely toward front. | ||
2 | Remove side stowage compartments (1, 4). | Installation: Slide stowage compartments at entry below floor covering | |
3 | Remove center stowage compartment (5) | ||
4 | Remove rear window | ||
5 | Remove edge bow (13) | ||
6 | Remove curtain rail (10) | Remove rail together with anchors Do not punch stud bolts toward inside (rattling noises while driving). | |
7 | Remove coat hook (11) | ||
8 | Remove Torx screws (15) from grab handles (16) | Tilt grab handles toward front. | |
| |||
9 | Remove door seal (17) from door cutout in area of rear wall paneling | ||
10 | Remove seatbelts | Only when equipped with statically suspended seats. Remove retaining bracket from seat subconstruction | |
11 | Remove plastic anchor (20) | ||
12 | Remove rear wall paneling (7) | ||
13 | Pull covers (18, 19) and vent nozzles (8) out of cutouts in rear wall paneling | Only when replacing rear wall paneling | |
14 | Install in the reverse order |
Grab handle
Number | Designation | Body | Body | Body | |
BA68.70-N-1001-01A | Screw for grab handle on cab | NM | 18 | 18 | 18 |
Grab handle