AR68.30-W-1330C | Remove/install cable cover in footwell on passenger side | 6.3.06 |
MODEL 374.502 /523 /551 /554 /557 /584 with BODY 374.860
MODEL 374.602 /651 /655 /682 /685 with BODY 374.870
MODEL 375.1 with BODY 375.850
MODEL 375.3 with BODY 375.820
MODEL 375.4 with BODY 375.860
MODEL 374.607 /691 /695, 940, 942, 943, 944 with BODY 944.890
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890
MODEL 958.0 with BODY 958.860 with CODE (XV0) Global cockpit
MODEL 958.2 with BODY 958.870 with CODE (XV0) Global cockpit
MODEL 958.4 with BODY 958.880
MODEL 970, 972, 974, 975, 976 with BODY 972.890
W68.30-1057-11
Shown on body 972.890
1 Paneling
2 Floor covering
3 Edge protection strip
4 Footwell cover
W68.30-1058-11
Shown on body 972.890
5 Cable cover
W68.30-1059-02
Shown on body 972.890
1 Paneling
6 Support rod
7 Center cable cover
8 Rear cable cover
9 Front section of stowage box
W68.30-1014-02
| Remove/install | ||
1 | Move front passenger seat to front-most position | ||
2 | Remove front section of stowage box (9) below bunk. | Only with code (F04) cab L (long). | |
3 | Remove center cable cover (7) | Only with code (F04) cab L (long). | |
4 | Remove rear cable cover (8) | Only with code (F04) cab L (long). | |
5 | Remove support rod (6) from B-pillar | The support rod (6) is inserted into the paneling (1) at bottom on the wheelhouse | |
6 | Remove paneling (1) from wheelhouse | ||
7 | Remove edge protection strip (3) | ||
8 | Slide front passenger seat completely toward rear | ||
9 | Fold floor covering (2) to side | ||
10 | Remove footwell cover (4) on passenger side. | ||
11 | Remove cable cover (5) in footwell of the passenger side | ||
12 | Install in the reverse order |