1 | Protective tubing |
2 | Driver-side footwell cover |
3 | Velcro strip |
4 | Bolts |
5 | Foam gasket |
X123.18 | Driver door electrical connector |
X124.15 | Driver door electrical connector |
W68.30-1206-11
| Remove/install | ||
1 | Switch off ignition | ||
2 | Remove bolts (4) | ||
3 | Remove protective hose (1) from driver side footwell cover (2) | ||
4 | Remove driver-side footwell cover (2) | The driver side footwell cover is additionally fastened with a velcro strip (3). | |
Installation: Ensure that foam gasket (5) is seated correctly on air duct of footwell ventilation. | |||
5 | Disconnect both driver door electrical connectors (X123.18, X124.15) and guide through driver side footwell cover (2) | ||
6 | Remove driver side footwell cover (2) | ||
7 | Install in the reverse order |