ar6830s4010s

Remove/install paneling in footwell

Type ar · emne 68.30 · version 0104 · 2019-12-23

Gælder for: Model 636, 639.601/603/605/701/703/705/711/713/811/813/815

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 636 · Serie 639 (modeller 601, 603, 605, 701, 703, 705, 711, 713, 811, 813, 815)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.37 fodrumsbeklædning — Serie 636 · Serie 639 (modeller 601, 603, 605, 701, 703, 705, 711, 713, 811, 813, 815)

AR68.30-S-4010S

Remove/install paneling in footwell

06.12.2019

Model

636, 639.601/603/605/701/703/705/711/713/811/813/815

Remove/install paneling in footwell
Remove/install paneling in footwell

S68.30-4514-01

Left cover

Right cover

S68.30-4515-01

Remove/install

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

1

Open door

2

Unclip paneling at bottom (arrow A)

Installation: Replace clips if necessary.

3

Pull paneling out to the rear (arrows B)

Installation: Pay attention to catch hook. Ensure that the door seal is seated correctly.

4

Install in the reverse order

Henviste dokumenter