ar6830s0007p

Remove/install A-pillar trim on front passenger side

Type ar · emne 68.30 · version 0200 · 2018-11-15

Gælder for: Model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 470 · Serie 471

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.30 Beklædning kabine — Serie 470 · Serie 471

AR68.30-S-0007P

Remove/install A-pillar trim on front passenger side

31.10.2018

Model

470, 471

Modification notes

29.10.2018

General information added.

Step 4

Remove/install A-pillar trim on front passenger side

1

A-pillar trim panel

1.1

Pin

2

Grab handle

3

Covers

4

Bolts

5

A-pillar

6

Frame seal

S68.30-4750-06

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Release sealing frame (6) along A-pillar trim (1).

3

Release covers (3) with a suitable tool.

4

Unscrew screws (4) and remove grab handle (2).

Screws (4) remain in grab handle (2).

5

Unclip A-pillar trim (1) in upper area from A-pillar (5).

Long wedge

*115589035900

6

Move A-pillar trim (1) upwards and remove.

Installation: Ensure pins (1.1) engage in guides (arrows A).

7

Install in the reverse order

Remove/install A-pillar trim on front passenger side

115 589 03 59 00

Long wedge

Henviste dokumenter