Remove/install trunk lid cover

AR68.30-P-8151CLW

Remove/install trunk lid cover

03.02.2020

Model

205.3

Shown on model 205.3 up to model year 2020 with removed trunk lid

2

Hinge cover

22

Stop buffer

5

Hazard warning triangle bracket

23

Retaining clips

6

Ambient lamp and warning lamp

24

Cover

19

Retaining clips

25

Trunk lid/tailgate control button (with code 460 (Canada version) and with code 494 (USA version))

20

Cover

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove warning triangle from warning triangle bracket (5).

2

Remove warning triangle bracket (5).

3

Remove hinge covers (2).

4

Unclip retaining clips (19) and release trim (20) until electrical connectors can be accessed.

 Clip remover

*452589016300

5

Release and disconnect electrical connectors of ambient lamp and warning lamp (6).

Model 205.3
up to model year 2020

6

Release and disconnect electrical connectors of trunk lid/tailgate control button (25).

Model 205.3
with code 460 (Canada version)
with code 494 (US version)

7

Remove trim (20).

 Installation: Hook paneling (20) into stop buffers (22).

8

Remove stop buffers (22).

 Installation: Fully screw in stop buffers (22).

9

Unclip retaining clips (23) and remove trim (24).

 Clip remover

*452589016300

10

Install in the reverse order.

Adjust

11

Unscrew stop buffers (22) until trunk lid rests on stop buffers (22) in closed condition.