Remove/install upper side trim in rear passenger compartment

AR68.30-P-4783LWO

Remove/install upper side trim in rear passenger compartment

27.09.2018

Model

238

Modification notes

19.09.2018

Disconnect electrical connector, inserted.

Operation step 7

Shown on left side of vehicle on model 238.3

1

Upper side trim

5

Belt guide rail

2

Bolts

6

Frame seal

3

Seat belt

7

Inner sealing rail

4

Retaining bracket

Shown on the upper left side trim (1) on model 238.3 with code 810 (Sound system)

1

Upper side trim

8

Retaining clips

9

Retaining clips

10

Tweeter

Shown on left side of vehicle on model 238.4

1

Upper side trim

11

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove screws (2) and extend seat belt (3) from the retaining bracket (4).

 Bolt, front belt end fitting

*BA91.40-P-1003-01U

2

Remove belt guide rail (5) completely from the upper side trim (1) and extend seat belt (3).


Remove belt guide rail (5) slowly and evenly.
Otherwise the belt extender can be damaged.

 Installation:
Insert belt guide rail (5) slowly and evenly.
Otherwise the belt extender can be damaged.

3

Unlock and fold over rear seat backrest.

4

Lower rear side window.

5

Detach sealing frame (6) in area of top side trim (1).

6

Detach inner sealing rail (7) until the retaining clips (8) are accessible.

7

Separate electrical connector (11).

Model 238.4
When removing top left side trim (1).

8

Unclip top side trim (1) from retaining clips (9).


Model 238
with code 810 (Sound system)
Model 238
with code 811 (Advanced sound system)
Carefully unclip the upper side trim (1).
Otherwise, the electrical connector of the tweeter (10) (located beneath the trim) may be damaged.

9

Disconnect electrical connector from tweeter (10).

Model 238
with code 810 (Sound system)
Model 238
with code 811 (Advanced sound system)

10

Unclip upper side trim (1) from body and remove it.

 Installation: Attach retaining clips (8) still on the body to the upper side trim (1).

11

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 238

BA91.40-P-1003-01U

Bolt, front belt end fitting

Nm

35

M10x12

Nm

-

M10x16

Nm

-