AR68.30-P-4600SXS | Remove/install paneling in trunk | 19.9.06 |
MODEL 221.1 with CODE (Z07) Top protection
P68.30-3288-06
Shown on emergency fresh-air system
1 Upper trunk paneling
2 Equipment carrier plate
(on vehicles with emergency fresh-air system)
3 Side paneling in trunk on right
4.1 Trunk floor paneling, short
(on vehicles with emergency fresh-air system)
5 Rear center section paneling
6 Side paneling in trunk on left
P68.30-3289-06
Shown on fire extinguishing system, without emergency fresh-air system
1 Upper trunk paneling
3 Side paneling in trunk on right
4.2 Trunk floor paneling, long
(on vehicles without emergency fresh-air system)
5 Rear center section paneling
6 Side paneling in trunk on left
7 Front left trunk paneling
(on vehicles without fire extinguishing system, without emergency fresh-air system)
8 Extinguishing agent tank paneling
(on vehicles with fire extinguishing system, without emergency fresh-air system)
9 Electrical center paneling
(on vehicles without emergency fresh-air system)
10 Front middle trunk paneling
(on vehicles without emergency fresh-air system)
| Remove/install | ||
1.1 | Remove lashing hooks on long trunk floor paneling (4.2) | On vehicles without emergency fresh-air system. | |
2.1 | Remove long trunk floor paneling (4.2) | On vehicles without emergency fresh-air system. | |
2.2 | Remove short trunk floor paneling (4.1) | On vehicles with emergency fresh-air system. | |
3.1 | Remove equipment carrier plate (2) | On vehicles with emergency fresh-air system. | |
4.1 | Remove front middle trunk paneling (10) | On vehicles without emergency fresh-air system. | |
5.1 | Remove extinguishing agent tank paneling (8) | On vehicles with fire extinguishing system, without emergency fresh-air system. | |
6.1 | Remove front left trunk paneling (7) | On vehicles without fire extinguishing system, without emergency fresh-air system. | |
7.1 | Remove electrical center paneling (9) | On vehicles without emergency fresh-air system. | |
8 | Remove rear center section paneling (5) | ||
9 | Remove clip on rear center section, remove latching hooks and left luggage compartment lamp from paneling on left side of trunk (6) | ||
10 | Remove paneling on left side of trunk (6) | Installation: Ensure that frame for hinge lever passage is properly seated. | |
11 | Remove clip on rear center section, remove latching hooks and right luggage compartment lamp from paneling on right side of trunk (3) | ||
12 | Remove paneling on right side of trunk (3) | Installation: Ensure that frame for hinge lever passage is properly seated. | |
13 | Remove left and right bag hooks from paneling at top of trunk (1) | ||
14 | Remove upper trunk paneling (1). | Installation: Observe velcro connection in center of paneling at top of trunk (1). | |
15 | Install in the reverse order |