Remove/install rear shelf

AR68.30-P-4581LWO

Remove/install rear shelf

07.04.2017

Model

238.3

Shown with code 540 (Electric roller sunblind for rear window) and code 810 (Sound system)

1

Rear shelf

6

Electrical connector

2

C-pillar paneling

7

Screw

3

Spacer

8

Catch

4

Electrical connector

9

Electrical wiring harness

5

Electrical connector

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on sensor system for trunk lid opening/closing

AH80.61-P-0001-01A

 

Remove/install

1

Remove right and left C-pillar trim (2)

AR68.30-P-4490LWO

 C-pillar trims (2) can remain in vehicle.

2

Remove spacers (3)

 Clip remover

*452589016300

3

Disconnect electrical connector (4)

4

Disconnect electrical connection (5)

Model 238.3
with code 810 (Sound system)
Model 238.3
with code 811 (Advanced sound system)

5

Disconnect electrical connector (6)

Model 238.3
with code 540 (Electric sunblind for rear window)

6

Remove electrical wiring harness (9) from body

7

Detach screws (7)

Model 238.3
with code 540 (Electric sunblind for rear window)

8

Release catches (8) of rear shelf (1) and slightly push rear shelf (1) towards front

 Installation: Ensure that catches (8) are seated correctly.

9

Remove rear shelf (1).

 Helper required.

10

Install in the reverse order