ar6830p4498mfd

Remove and reinstall C-pillar trim

Type ar · emne 68.30 · version 0100 · 2019-04-15

Gælder for: Model 118.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 118 (modeller 6**)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.30 Beklædning kabine — Serie 118 (modeller 6**)

AR68.30-P-4498MFD

Remove and reinstall C-pillar trim

28.03.2019

Model

118.6

Remove and reinstall C-pillar trim

1

C-pillar paneling

2

Cover

E18/5

Left load compartment lamp

P68.30-A021-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Remove luggage compartment roller blind.

2

Fold over seat backrest of the rear bench seat.

3

Unclip cover (2) and the clamp underneath.

4

Unclip C-pillar trim (1) with a suitable tool and remove as far as possible.

Installation: Position C-pillar trim (1) correctly in the edge guard.

5

Release and disconnect electrical connector of the left load compartment lamp (E18/5).

Only on left side of vehicle.

6

Install in the reverse order.

Henviste dokumenter