Remove/install paneling on D-pillar

AR68.30-P-4495PA

Remove/install paneling on D-pillar

14.12.09

 

Remove/install



Protect remove parts against soiling.



Note on function reliability of windowbag

AH91.60-P-0693-01A

1

Remove rear cargo area floor covering

See: 

Remove, install floor covering in cargo area

AR68.20-P-4810PB

2

Open stowage compartment flap and remove

3

Remove cargo retainers (5).



*BA68.50-P-1002-02A

4

Remove trunk lid cover (6)

 Long wedge

 Move long wedge to clips as close as possible to press out cover.

*115589035900

5

Remove roof frame paneling

AR68.30-P-4470PA

6

Loosen lower paneling on D-pillar (1a) and remove

Remove door seal from fold in area of paneling (1a, 1b)

7

Unclip upper paneling from C-pillar (1b) and remove

 Long wedge

 When removing do not damage catch tab (arrow)

 Move long wedge to paneling as close as possible to press out cover.

*115589035900

8

Disconnect D-pillar interior lamp electrical connector (7)

9

Install in the reverse order

Number

Designation

Model 203.2

BA68.50-P-1002-02A

Bolt, cargo retainer bracket on D-pillar

Nm

20