Removing and installing trim panel at D-pillar

AR68.30-P-4495F

Removing and installing trim panel at D-pillar

18.1.10

 

Removal, installation

1.1

Open spare wheel cover and remove

 When removing left trim panel (1)

1.2

Open right stowage compartment cover and remove

 When removing right trim panel (1)

2

Remove rear load anchor

3

Remove guide rail (2) for retractable cover

4.1

Pull cover (4) off of paneling (1) and unscrew nut (5)

 Vehicles with window airbag (code 290)



*BA91.60-P-1005-01A

5

Carefully unclip paneling (1) with long wedge and remove

 Position long wedge directly at clips (6)
 Installation: Ensure that the lug (arrow) reaches correctly into the clip (8).
Check clips (6) and (8) on window cutout, replace if necessary.

6

Disconnect electrical connector (7) from interior lamp

7

Install in opposite order

 Installation: Ensure that the lugs (arrows) reach correctly into the window cutout clips.

Number

Designation

Model 210

BA91.60-P-1005-01A

Nut for window airbag on roof frame

Nm

5