Remove/install C-pillar trim sections

AR68.30-P-4491LWV

Remove/install C-pillar trim sections

22.12.2016

Model

213.1

Shown with code 540 (Electric roller sun blind for rear window) and code 297 (Roller sun blinds in rear doors)

1

Side paneling

2.2

Connector

4.1

Handle

2

Inner C-pillar paneling

3

Rear C-pillar paneling

5

Screw

2.1

Seat belt channel

4

Outer C-pillar paneling

Shown with code 540 (Electric roller sun blind for rear window) and code 297 (Roller sun blinds in rear doors)

3

Rear C-pillar paneling

4

Outer C-pillar paneling

Shown with code 540 (Electric roller sun blind for rear window) and code 297 (Roller sun blinds in rear doors)

4

Outer C-pillar paneling

6

Nut

7

Window airbag

 

Remove/install

1

Remove side paneling (1)

AR68.30-P-4780LWE

2

Remove bolt (5) and remove belt end fitting

Model 213.1
except code 223 (Electrically adjustable rear bench seat)

 Bolt, rear belt end fitting

*BA91.40-P-1005-01U

3

Loosen edge guard in area of inner C-pillar paneling (2)

4

Unclip inner C-pillar paneling (2) and allow to hang down on seat belt

 Model 213.1
with code 297 (Roller sun blinds in rear doors)
Installation: Ensure that handle (4.1) of roller sun blind is not pinched and is freely accessible after clipping in.

5

Loosen belt guide (2.1) from inner C-pillar paneling (2)

6

Remove connector (2.2)

7

Remove belt guide (2.1) from seatbelt

8

Remove inner C-pillar paneling (2) from seat belt

9

Unclip rear C-pillar paneling (3) at top and remove

 Model 213.1
with code 540 (Electric sunblind for rear window)
Installation: Ensure that guide pin is seated correctly on roller sun blind (arrow B) in guide (arrow A).

 Installation: Ensure that rear C-pillar paneling (3) is seated correctly in brackets (arrows C).

10

Unscrew nuts (6)


Carefully press headliner to side in area of front nut (6).
Otherwise the headliner can be damaged or soiled.

11

Unclip outer C-pillar paneling (4)

12

Remove outer C-pillar paneling (4) and guide out at rear below windowbag (7)


Carefully guide outer C-pillar paneling (4) below windowbag (7).
Otherwise the windowbag (7) can be damaged.

13

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 213

BA91.40-P-1005-01U

Bolt, rear belt end fitting

Nm

35