ar6830p4490mfb

Remove/install trim at C-pillar

Type ar · emne 68.30 · version 0101 · 2019-09-11

Gælder for: Model 247.0/7

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 247 (modeller 0**, 7**)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.30 Beklædning kabine — Serie 247 (modeller 0**, 7**)

AR68.30-P-4490MFB

Remove/install trim at C-pillar

21.08.2019

Model

247.0/7

Remove/install trim at C-pillar

Shown on model 247.7 on left side of vehicle

1

Cover

3

Cover

E18/5

Left load compartment lamp

P68.30-4106-05

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Remove rear shelf.

2

Fold left or right rear seat forward.

3

Unclip cover (1).

Long wedge

*115589035900

4

Remove edge guard in working area.

Installation: Ensure that edge guard is correctly positioned.

5

Unclip trim (3).

Long wedge

*115589035900

6

Release and disconnect electrical connector on left load compartment lamp (E18/5).

When removing left trim (3).

7

Remove trim (3).

Installation: Insert cover (1) into trim (3) with associated clip.

8

Unclip left load compartment lamp (E18/5) and remove.

When replacing left trim (3).

9

Install in the reverse order.

Remove/install trim at C-pillar

115 589 03 59 00

Long wedge

Henviste dokumenter