Remove/install trim at C-pillar

AR68.30-P-4490LW

Remove/install trim at C-pillar

13.2.15

MODEL

205.0/1

Shown on right side of vehicle

1

C-pillar paneling

2

Edge guard

3

Screw

4

Cover

5

Headliner

6

Seat belt

 

Remove/install

1

Remove seat cushion in the rear

MODEL 205.0/1
without CODE 248 (Rear seat with integrated child seat)
without CODE P10 (Taxi package Germany)

AR91.12-P-1020LW

MODEL 205.0/1
with CODE 248 (Rear seat with integrated child seat)
MODEL 205.0
with CODE P10 (Taxi package Germany)

AR91.12-P-1020LWA

2

Remove edge guard (2) in area of C-pillar paneling (1)

3

Unscrew bolt (3)

 Screw/bolt, rear belt end fitting

*BA91.40-P-1005-01U

4

Unclip cover (4)

 Retaining clip remains in C-pillar paneling (1).

 Clip remover

*452589016300

5

Detach C-pillar paneling (1) from C-pillar, slightly tilt toward center of vehicle and then move out toward front


Carefully remove C-pillar paneling (1).
Otherwise the headliner (5) can be damaged.

 Installation: Insert cover (4) into retaining clips on C-pillar paneling (1).
Clip in C-pillar paneling (1) completely preassembled.
Ensure that C-pillar paneling (1) is seated correctly.

6

Guide seat belt (6) through C-pillar paneling (1)

7

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 205.0

MODEL 205.1

BA91.40-P-1005-01U

Screw/bolt, rear belt end fitting

Nm

35

35