Remove/install trim at C-pillar

AR68.30-P-4490GQS

Remove/install trim at C-pillar

15.10.14

MODEL

166 (except 166.8)

with CODE Z05 (B5 armoring on special protection version)

1

Trunk lining

2

Interior paneling

3

Edge guard

4

Retaining clamp

5

Guide lugs

 

Remove/install

1

Remove edge guard (3) on interior paneling (2) from C-pillar

2

Unscrew bolt from belt end fitting at bottom

 Bolt, belt end fitting/seat belt lock, rear seat on body/seat

*BA91.40-P-1007-01R

3

Unclip interior paneling (2) from C-pillar on side wall

 Installation: Make sure that retaining clip (4) is seated properly. Guide interior paneling (2) into headliner free of tension.

 Installation: Do not twist seat belt.

 Mounting wedge

*110589035900

4

Remove side paneling in trunk

AR68.30-P-4800GQ

5

Unclip trunk paneling (1) from C-pillar on side wall

 Installation: Install guide lugs (5) into C-pillar paneling free of tension.

 Mounting wedge

*110589035900

6

Install in the reverse sequence

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 166

BA91.40-P-1007-01R

Bolt, belt end fitting/seat belt lock, rear seat on body/seat

Nm

35