Remove/install trim at C-pillar

AR68.30-P-4490EL

Remove/install trim at C-pillar

27.10.10

 

Remove/install

1

Remove left or right rear seat cushion

AR91.12-P-1020EL

2

Unscrew bolt (3) from rear belt end fitting (4)



*BA91.40-P-1014-01Q

3

Detach edge guard (5) in area of upper C-pillar paneling (1) and lower C-pillar paneling (2)

4

Unclip cover (6) (arrow A), turn 90° in direction of arrow (arrow B) and remove

 Long wedge

*115589035900

5

Unscrew nut (7)

6

Unclip roller blind guide rail (8) stating at top from upper C-pillar paneling (1) and lower C-pillar paneling (2) and remove.

On vehicles with code (540) Electric roller blind for rear window

 Installation: First hook roller sun blind guide rail (8) into cutout in lower C-pillar paneling (2) (arrow D). At the same time, insert driver (13) of roller sun blind (14) into opening (arrow E).

7

Remove upper C-pillar paneling (1) (arrows C) and remove

 Long wedge

*115589035900

 Installation: Ensure that check strap of upper C-pillar trim (1) is seated correctly at threaded pin.

8

Unscrew bolt (9)

9

Unclip C-pillar paneling (2) form catch hook (10)

10

Swivel lower C-pillar trim (2) in upper area in direction of vehicle center

11

Carefully press down cover with padding of rear seat backrest in area of lower C-pillar trim (2) until lower C-pillar trim (2) can be removed

12

Pull lower C-pillar trim (2) towards front out of rear shelf panel (11)

 Installation: Carefully position C-pillar paneling (2) in area of rear window, otherwise the electrical leads and the contact on the rear window can be damaged.

 Installation: Insert guides (12) of lower C-pillar trim (2) into corresponding supports
 of rear shelf panel (11) using the extraction hook.

 Pulling hook

*140589023300

13

Guide seat belt through lower C-pillar trim (2) and remove lower C-pillar trim (2)

14

Install in the reverse order

Number

Designation

Type
218.3

BA91.40-P-1014-01Q

Bolt at rear belt end fitting

Nm

40