Remove/install front section of roof lining

AR68.30-P-4306LFS

Remove/install front section of roof lining

19.09.2019

Model

222.9

with code Z07 (B7 armoring on special protection version)

1

Front section of roof lining

2

Front grab handle

3

Edge guard

4

Sun visor

5

Retaining clips

1

Front section of roof lining

6

Magnet

7

Guide hook

8

Electrical wiring harness

9

Lamp

10

Microphone

 

Remove/install

1

Remove panelings from B-pillars

AR68.30-P-4700LF

2

Remove paneling on A-pillars

AR68.30-P-4050LF

3

Remove cover from inside rearview mirror

4

Move driver and passenger seat toward rear and move backrest downward as far as possible

5

Remove overhead control panel control unit

AR82.20-P-1000LF

6

Remove sun visors (4)

AR68.60-P-5480NKB

7

Remove front grab handles (2)

AR68.30-P-4330NKB

8

Detach edge guard (3) in area of front section of roof lining (1)

9

Unclip retaining clips (5)

10

Carefully release front section of rear roof lining (1) at center, pull downward and then slide forward.

 Slide front section of roof lining (1) toward front until guide hooks (7) are guided out of roof paneling mounts. Front section of roof lining (1) is also attached to roof paneling with magnet (6).

11

Detach electrical wiring harness (8) from front section of roof lining (1) and allow to hang down

12

Remove front section of roof lining (1)

 Helper required.

Replace

13

Modify lamps (9)

14

Modify microphones (10)

15

Modify electrical wiring harness (8) of front section of roof lining (1)

16

Install in the reverse order