ar6830p430504t

Install rear dome lamp wiring harness in headliner

Type ar · emne 68.30 · version 0102 · 2010-03-29

Gælder for: MODEL 211.0 /2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 211 (modeller 0**, 2**)

EinPAS 30 Belysningsanlæg › 30.20 Indvendig belysning › 30.20.12 Sensor/kontakt/ledningssæt — Serie 211 (modeller 0**, 2**)

AR68.30-P-4305-04T

Install rear dome lamp wiring harness in headliner

Repair materials

Number

Designation

Order number

BR00.45-Z-1071-02A

Adhesive tape roll, gray Tesa tape, 50 meters 0.3X50, 236 mm

A 001 989 17 85

Install rear dome lamp wiring harness in headliner

P68.30-2694-06

Shown on model 211.2 with code (414a) Electric glass tilting/sliding roof

1 Position dome lamp wiring harness (1) on new headliner (2).

Observe marking "UP" at dome lamp wiring harness (1).

2 Route dome lamp wiring harness (1) according to routing of old headliner (2) without kinks and glue to new headliner (2) with adhesive tape (3).

Firmly press on adhesive tape (3), otherwise the adhesive tape (3) can detach itself from the headliner (2).