AR68.20-W-2040C | Remove/install floor covering | 6.3.06 |
MODEL 374.502 /523 /551 /554 /557 /584 with BODY 374.860
MODEL 374.602 /651 /655 /682 /685 with BODY 374.870
MODEL 375.1 with BODY 375.850
MODEL 375.3 with BODY 375.820
MODEL 375.4 with BODY 375.860
MODEL 374.607 /691 /695, 940, 942, 943, 944 with BODY 944.890
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890
MODEL 958.0 with BODY 958.860
MODEL 958.2 with BODY 958.870
MODEL 958.4 with BODY 958.880
MODEL 970, 972, 974, 975, 976 with BODY 972.890
W68.20-1016-11
Shown on body 972.890
1 Engine tunnel floor covering
2 Support rod
3 Paneling
4 Edge protection strip
5 Driver side floor covering
6 Sensor unit cover (only on vehicles with code (GE1) Automatic gear control (AGS))
7 Level control operating device
A93 Automatic gear control (AGS) shift control unit (only on vehicles with code (GE1) Automatic gear control (AGS))
W68.20-1017-11
Shown on body 972.890
1 Engine tunnel floor covering
2 Support rod
3 Paneling
4 Edge protection strip
8 Floor covering on passenger side
| Remove/install | ||
1 | Remove front seats | Model 374, 375, 940, 942, 943, 944, 950.5/6, 952.5/6, 953.6, 954.5, 970, 972, 974, 975, 976 | |
Model 958 | |||
2 | Remove support rod (2) from B-pillar | The support rod (2) is inserted into paneling (3) at bottom on wheelhouse | |
3 | Remove paneling (3) from wheelhouse | Disconnect electrical connector from level control operating device (7) | |
4 | Remove edge protection strip (4) | ||
5 | Remove driver side floor covering (5) and passenger side floor covering (8) | ||
6.1 | Remove automatic gear control (AGS) shift control unit (A93) | Vehicles with code (GE1) Automatic gear control (AGS) | |
Installation: Check whether connector on automatic gear control (AGS) shift control unit (A93) is seated correctly | |||
6.2 | Remove gear control shift control unit | Vehicles with code (GS2) Gear control | |
Installation: Check whether connector on gear control shift control unit is seated correctly. | |||
6.3 | Remove gearshift lever cover | Vehicles without code (GS2) Gear control and without code (GE1) Automatic gear control (AGS) | |
7 | Remove sensor unit cover (6) | Only on vehicles with code (GE1) Automatic gear control (AGS) or code (GS2) Gear control | |
8 | Remove stowage compartment from center module | Vehicles with code (FN1) Distributor vehicle cockpit | |
Vehicles with code (FN2) Comfort cockpit | |||
Vehicles with code (FN3) Long-distance haulage vehicle cockpit | |||
9 | Remove engine tunnel floor covering (1) | ||
10 | Remove stowage box/tray from rear wall paneling | Only on vehicles with code (F04) L cab (long) | |
11 | Remove rear floor covering | Only on vehicles with code (F04) L cab (long) | |
12 | Install in the reverse order |
Henviste dokumenter
- ar2660w0012d Af-, påmontering af gearføleraggregat
- ar2660w0012e Gearvælger af-, påmonteres
- ar6810w1624a
- ar6810w1624b
- ar6810w1624c
- ar6830w4755e
- ar6870w0303c
- ar9110w1000a
- ar9110w1000b