ar6820s200006e

Make bores in center console

Type ar · emne 68.20 · version 0100 · 2018-05-04

Gælder for: Model 447 with code FG0 (Deluxe center console with roller shutter door) with code ZK7 (Equipment line MARCO POLO) except code FF1 (Centre console with stowage compartment) except code FF2 (Centre console with 1-DIN aperture)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.20 Midterkonsol — Serie 447

EinPAS 37 Indvendigt udstyr › 37.20 Midterkonsol › 37.20.30 Midterkonsol/armlæn/beklædning/afdækning — Serie 447

AR68.20-S-2000-06E

Make bores in center console

Model

447

with code FG0 (Deluxe center console with roller shutter door)

with code ZK7 (Equipment line MARCO POLO)

except code FF1 (Centre console with stowage compartment)

except code FF2 (Centre console with 1-DIN aperture)

Make bores in center console

S68.20-4579-79

View from below

1

Produce bores (1) with a diameter of Ø 3 mm as shown.

Dimension (a): 85 mm
Dimension (b): 70 mm

Make bores in center console

S68.20-4578-79

View from front

2

Produce bore (2) with a diameter of Ø 25 mm precisely in center as shown.

Dimension (c): 30 mm

3

Produce cutouts (3) with a width of 7.5 mm and a height of 20 mm as shown.

Dimension (d): 40 mm
Dimension (e): 20 mm
Dimension (f): 84 mm