Serier
da
ar6820p2310a
Remove/install cover on gearshift lever
Type ar · emne 68.20 · version 0103 · 2018-11-23
Gælder for: Model 463.200/204/206/207/208/209/220/221/224/225/227/228/230/231/232/233/240/241/300/304/307/308/320/321/324/325/327/328/330/331 up to model year 2019
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.20 Midterkonsol — Serie 463 (modeller 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
EinPAS 37 Indvendigt udstyr › 37.20 Midterkonsol › 37.20.30 Midterkonsol/armlæn/beklædning/afdækning — Serie 463 (modeller 200, 204, 206, 207, 208, 209, 220, 221, 224, 225, 227, 228, 230, 231, 232, 233, 240, 241, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331)
AR68.20-P-2310A
Remove/install cover on gearshift lever
07.11.2018
Model
463.200/204/206/207/208/209/220/221/224/225/227/228/230/231/232/233/240/241/300/304/307/308/320/321/324/325/327/328/330/331
up to model year 2019
1
Shift gate
2
Bolts
3
Boot for transfer case shift lever
4
Screw
Remove/install
Unclip frame of shift gate (1)
Unclip frame of shift gate (1) at side upwards using long wedge.
Long wedge
*115589035900
Remove screws (2)
Unclip boot for transfer case shift lever (3)
Pull boot (3) over transfer case shift lever.
Long wedge
*115589035900
Remove screw/bolt (4)
Lift cover at gearshift lever at center
Remove couplings
Couplings at rear of cover at gearshift lever.
Remove cover at gearshift lever
Install in the reverse order
