Remove/install front floor covering (left)

AR68.20-P-2050RT

Remove/install front floor covering (left)

24.3.05

 

Remove/Install

1

Completely move left front seat toward rear

 See Operator's Manual

2

Remove door sill molding

AR68.30-P-4100RT

3

Remove paneling in footwell

AR68.30-P-4010RT

4

Unscrew nuts (3), remove accelerator pedal (4) and lay down in footwell

 Slightly pull accelerator pedal (4) out in upper area, press upward (arrow D) and remove from firewall.

AR30.12-P-1321RT

 Do not separate electrical connector

5

Unclip guide rail cover (1) and remove from guide rail at side (arrow A).

 Long wedge

*115589035900

6

Unclip guide rail cover (2) and remove from guide rail toward front (arrow C).

 To unclip, guide suitable tool into opening in guide rail cover (2) (arrow B) and unclip guide rail cover (2).

7

Pull out floor covering (5) below center console (6) (arrows E)

 Long wedge

*115589035900

8

Raise floor covering (5) on front seat (arrow F) and pull out of footwell (arrow G) toward rear.

 Installation: Ensure that floor covering is seated correctly below center console and in brackets (7).

9

Remove floor covering (5)

10

Install in the reverse order