Remove/install cover on gearshift lever

AR68.20-D-2310A

Remove/install cover on gearshift lever

30.06.2016

Model

900, 906

Shown on model 906 with transmission 711 and code JD1 (Tachograph with digital technology)

1

Shift lever boot

2

Cover



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Open glove compartment door

2

Remove air vent coverings from instrument panel center section

AR68.10-D-1585A

3

Remove center footwell cover

AR68.30-D-1320A

4.1

Unclip shift lever boot (1) and slide gearshift lever upward

Model 900 with transmission 711
Model 906 with transmission 710, 711, 715, 716

4.2

Remove selector lever handle with covering

Model 906 with transmission 722

Model 906 with transmission 722.9

AR27.60-D-0905WE

5.1

Remove digital tachographs (DTCO)

Model 906
with code JD1 (Digital tachograph)
Model 906
with code JD2 (Tachograph digital EC with rpm + aux-recorder)

AR54.61-D-0008A

5.2

Remove stowage compartment from cover (2)

Model 900
Model 906
except code JD1 (Digital tachograph)
except code JD2 (Tachograph digital EC with rpm + aux-recorder)

 Removal:
Carefully remove stowage compartment.
Otherwise the cover (2) can be damaged.

 Long wedge

*115589035900

6

Unscrew bolts from cover (2)

7

Pull cover (2) toward rear and disconnect electrical connector from 12-V-socket

8

Remove cover (2) upward

9

Install in the reverse order



Check

10

Carry out function test of tachograph

Model 906
with code JD1 (Digital tachograph)
Model 906
with code JD2 (Tachograph digital EC with rpm + aux-recorder)

11

Check 12-V-socket for proper function