Remove/install center module

AR68.10-W-1004HA

Remove/install center module

03.09.2018

Model

963

with code F2A (Floor variant, flat floor)

except code D1Z (Centre seat, with seat belt)

except code F2B (Floor variant, tunnel 170 mm)

except code F2C (Floor variant, tunnel 320 mm)

Model

964

with code F2A (Floor variant, flat floor)

except code D1Z (Centre seat, with seat belt)

except code F2B (Floor variant, tunnel 170 mm)

except code F2C (Floor variant, tunnel 320 mm)

except code G5H (Gearshift, manual)

Modification notes

02.08.2018

Pull out bottom drawer and remove insert, added.

Operation step 1.2

Shown on vehicle with two sockets and without code D7K (Drawer, under dash support)

1

Center module

2

Lower stowage compartment

3

Insert

4

Screw

X137.3

12V footwell socket

X168.3

Footwell socket 24V

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1.1

Remove insert (3) from bottom stowage compartment (2).

Vehicles without code D7K (Drawer, under dash support)

1.2

Pull out bottom drawer in center module (1) and remove insert.

Vehicles with code D7K (Drawer, under dash support)

 The screws (4) for fastening the center module (1) are accessible via the two cutouts at the back of the floor of the bottom drawer.

2

Unscrew screw/bolts (4).

 Screw, center module to center module carrier plate

*BA68.10-N-1004-03A

3

Pull out center module (1).

4

Switch off ignition and disconnect electrical connectors from sockets installed in center module (1).

Only for vehicles with sockets.

5

Install in the reverse order

 Center module

Number

Designation

Model 963, 964

BA68.10-N-1004-03A

Screw, center module to center module carrier plate

Nm

8