W68.10-1015-09
1 Passenger side footwell paneling
2 Bottom passenger side paneling
X13 Diagnostic socket
3 Upper passenger side paneling
W68.10-1017-09
4 Short center module paneling (with code (FN1) short center module waist rail)
5 Bottom driver's side paneling
11 Upper instrument panel paneling
P2 Instrument (INS)
6 Cover above instrument
7 Instrument panel cover
10 Instrument panel cover
W68.10-1016-06
5 Bottom driver's side paneling
7 Instrument panel cover
8 Parking brake cover
9 Long center module paneling (with code (FN2) long center module waist rail)
A12a0 Heater control and operating unit
A68 Switch module 4, master
A69 Switch module 9, waist rail
A76 Switch module 2, waist rail
A77 Switch module 1, waist rail
A78 Switch module 3, waist rail
A79 Switch module 5, waist rail
A80 Switch module 7, waist rail
A81 Switch module 8, waist rail
A82 Switch module 6, lock-up switch
S24 Light switch
| Remove/Install | ||
1 | Switch off ignition | ||
2 | Remove footwell paneling on passenger side (1) | ||
3 | Remove bottom passenger side paneling (2) | Disconnect electrical connector of diagnosis socket (X13) when removing paneling (2), for this purpose pull lock frame of diagnosis socket (X13) toward front. | |
4 | Remove diagnosis socket (X13) from bottom passenger side paneling (2). | ||
5 | Remove cover above instrument (6). | First unscrew the two mounting screws. Then the cover clipped above the instrument (6) in addition can be pulled out toward the front. | |
6 | Remove waist rail switch module 9 (A69) out of bottom driver-side paneling (5). | ||
7 | Remove bottom driver-side paneling (5). | The adjustable steering column should be positioned as far as possible toward driver's seat so that the bottom driver-side paneling (5) can be removed upward. | |
8.1 | Pull parking brake cover (8) out of short center module paneling (4). | Only with code (FN1) short center module waist rail. | |
8.2 | Pull parking brake cover (8) out of long center module paneling (9) | Only with code (FN2) long center module waist rail | |
9 | Pull ashtray out of ashtray housing | ||
10.1 | Pull ashtray housing out of short center module paneling (4) and disconnect electrical connector. | Only with code (FN1) short center module waist rail. | |
10.2 | Pull ashtray housing out of long center module paneling (9) and disconnect electrical connector | Only with code (FN2) long center module waist rail | |
11 | Pull can holder out of long center module paneling (9) | Only with code (FN2) long center module waist rail. | |
12 | Remove short center module paneling (4) from retaining frame | Only with code (FN1) short center module waist rail. When removing short center module paneling (4) disconnect electrical connector from 12 V socket. The 12 V socket can be clipped out of the short center module paneling (4). | |
13 | Remove upper section of long center module paneling (9). | Only with code (FN2) long center module waist rail. | |
14 | Remove waist rail switch modules 2, 1, 3 and 5 (A76 to A79) and 4 master switch module (A68) from instrument panel cover (7). | ||
15 | Remove lock-up switch module 6 (A82) from instrument panel cover (7). | ||
16 | Remove heater control and operating unit (A12a0) and light switch (S24) from instrument panel cover (7) | Thereby pull instrument panel cover (7) out of instrument panel cover (10) toward front, disconnect electrical connectors and remove heater control and operating unit (A12a0) as well as light switch (S24). | |
17 | Remove instrument panel cover (7) | ||
18 | Remove instrument (P2). | ||
19 | Remove instrument panel cover (10) | ||
20 | Remove upper passenger-side paneling (3). | ||
21 | Remove waist rail switch modules 7 and 8 (A80, A81) from upper instrument panel paneling (11). | ||
22 | Remove seal between upper instrument panel paneling (11) and windshield | ||
23 | Remove upper instrument panel paneling (11) | ||
24 | Install in the reverse order |
Henviste dokumenter
- ar5425w3280mp Af-, påmontering af kontaktmodul
- ar5425w3285mp Af- og påmontering kontaktmodul spærrekontakt
- ar6830w1300mp