Remove/install glove box

AR68.10-P-1400SX

Remove/install glove box

4.3.08

20.2.08

Tighten sequence for glove box added

 

Remove/install

1

Loosen trim strip (2) from dashboard on right outer side toward center until bolts (10) are accessible

Model 216

AR68.10-P-1180SC

Model 221

AR68.10-P-1180SX

2

Unscrew bolts (4) and remove right dashboard fuse box (F1/6) from mounts on glove compartment (1)

3

Remove cover (5)

AR68.10-P-1520SX

4

Unscrew bolt (6) and unclip dashboard bottom section (7)



*110589035900

5

Disconnect glove compartment lamp connector (X29/1)

6

Cover bottom edge of trim strip (2) with clean rag, carefully pull trim strip (2) upward and unscrew bolts (10)

7

Unscrew bolt (8)

8.1

Carefully pull trim strip (2) upward and unscrew hidden bolt (arrow)

Model 216

8.2

Open glove compartment box (1) and unscrew bolt (9)

Model 221

9

Unscrew bolts (11) and remove glove compartment (1)

 On model 216 the glove compartment (1) is additionally clipped into the dashboard on the left side at the height of the glove compartment lock.

10

Install in the reverse order