Remove/install glove compartment

AR68.10-P-1400H

Remove/install glove compartment

22.02.2019

Model

240

1

Glove compartment

4

Bolts

7

Stop buffer

2

Floor panel

5

Trim strip

E13/2

Glove compartment illumination with switch

3

Bolts

6

Exterior microphone connection socket

 

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Disconnect battery ground line

AR54.10-P-0003H

2

Open glove compartment (1)

3

Unclip glove compartment housing illumination with switch (E13/2) from the glove compartment housing

 Mounting wedge

*110589035900

4

Disconnect electrical connectors from the glove compartment housing illumination with switch (E13/2) and remove glove compartment housing illumination with switch (E13/2) from the glove compartment housing (1)

5

Unclip floor panel (2) and remove from the glove compartment housing (1)

 Mounting wedge

*110589035900

6

Remove screws (3, 4)

7

Pull glove compartment housing (1) out of the instrument panel until the exterior microphone connection socket (6) is accessible


Do not pull on trim strip (5),
otherwise, the trim strip (5) may be damaged.

8

Unclip exterior microphone connection socket (6) from the rear panel of the glove compartment housing (1) and remove glove compartment housing (1)

9

Install in the reverse order