Remove/install glove box

AR68.10-P-1400GZ

Remove/install glove box

7.11.11

15.9.11

Switch off ignition and remove transmitter key from EZS control unit, added

Operation step 1

5.10.11

Remove and disconnect electrical connectors, added

Steps 4, 5, 9



Remove



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Notes on avoiding damage to optical fibers during repair work

With Media Oriented System Transport (MOST)

AH82.60-P-0001-05AK

1

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

 On vehicles with code (889) Keyless Go: Press keyless go start/stop button repeatedly until ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2

Open glove compartment (1)

3

Move CD Changer (arrow) to closing position

Only on vehicles with code (819) CD changer.

4

Remove Media Interface electrical connector from glove box

Only on vehicles with code (518) Media Interface

AR68.10-P-1400-02CW

5

Remove AUX jack electrical connector from glove box

Only on vehicles without code (518) Media Interface

AR68.10-P-1400-01CW

6

Remove dashboard side paneling (2).

 Long wedge

*115589035900

7

Remove screws/bolts (3)

8

Remove glove compartment (1) downward and disconnect electrical connector for glove compartment illumination

9

Disconnect electrical connector from CD changer

Only on vehicles with code (819) CD changer.



Install

10

Connect electrical connector to CD changer

Only on vehicles with code (819) CD changer.

11

Connect electrical connector for glove box illumination

12

Install Media Interface electrical connector in glove box

Only on vehicles with code (518) Media Interface

AR68.10-P-1400-02CW

13

Install AUX jack electrical connector from glove box

Only on vehicles without code (518) Media Interface

AR68.10-P-1400-01CW

14

Position glove box (1) on instrument panel

15

Screw in screws (3)

16

Install instrument panel side paneling (2)

17

Check CD changer actuation button (4) for proper function

18

Close glove box (1)