P68.10-4346-09
1 | Glove compartment | 3 | Bolts | 5 | Air duct | ||
2 | Passenger side trim pieces | 4 | Instrument panel | X29/1 | Glove compartment electrical connector |
With CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) |
1 | Glove compartment |
A2/30-1 | Cradle for navigation module |
P68.10-4776-01
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove right cover below dashboard (4) | ||
2 | Remove passenger side trim pieces (2) from instrument panel (4) | ||
3 | Remove bolts (3) | ||
4 | Remove glove compartment (1) from instrument panel (4) until electrical connectors on glove compartment (X29/1) are accessible | Model 218 | |
5 | Disconnect electrical connector for glove compartment (X29/1) | ||
6 | Disconnect electrical connectors from holder for navigation module (A2/30-1) | Model 218 | |
7 | Remove glove compartment (1) | ||
8 | Remove holder for navigation module (A2/30-1) from glove compartment (1) | Model 218 | |
9 | Install in the reverse order | Installation: Ensure that connection (arrow) of air duct (5) on glove compartment (1) is seated correctly. |
Henviste dokumenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar6810p1180el