ar6810d1550a

Remove/install cover on instrument cluster

Type ar · emne 68.10 · version 0206 · 2003-09-15

Gælder for: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.10 Instrumentpanel — Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)

EinPAS 37 Indvendigt udstyr › 37.15 Instrumentpanel › 37.15.44 instrumentpanel/afdækning/beklædning/holder — Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)

AR68.10-D-1550A

Remove/install cover on instrument cluster

5.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Remove/install cover on instrument cluster

D68.20-1101-11

1 Cover

2 Bolt

3 Connector

Remove/Install

1

Unscrew screws (2)

2

Pull out cover (1)

*140589023300

To avoid damage to the cover when removing move removal hook (01) through second louver from bottom and position on reinforcement (magnified section).

Installation: Press in cover uniformly.

3

Disconnect plug (3)

A different number of switches may be fitted depending on vehicle equipment.

4

Install in the reverse order

Remove/install cover on instrument cluster

Pulling hooks

140 589 02 33 00