ar6520w100605a

Install front roof frame

Type ar · emne 65.20 · version 0102 · 2006-07-25

Gælder for: BODY 375.810 in MODEL 375.3 except CODE (DD5) Cab with high roof BODY 375.830 in MODEL 375.1 except CODE (DD5) Cab with high roof BODY 375.840 in MODEL 375.4 except CODE (DD5) Cab with high roof BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 except CODE (DD5) Cab with high roof BODY 944.899 in MODEL 944.0 /2 except CODE (DD5) Cab with high roof BODY 972.899 in MODEL 970, 972, 974, 975, 976 except CODE (DD5) Cab with high roof

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 65 Tag › 65.20 Tagramme — Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 899) · Serie 944 (modeller 0**, 2**, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.39 Tag › 35.39.30 tagplade/tagramme — Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 899) · Serie 944 (modeller 0**, 2**, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

AR65.20-W-1006-05A

Install front roof frame

Commercially available tools

Number

Designation

WH58.30-Z-1003-01A

Electrode miller

WH58.30-Z-1003-02A

Clamping pliers

WH58.30-Z-1031-02A

C-clamp

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1024-04A

Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)

WH58.30-Z-1001-40A

Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-02A

Inert gas welder

WE58.40-Z-1002-02A

Spot welder

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Install front roof frame

W65.20-1015-06

1 Fit front roof frame and fasten with clamping pliers.

2 Front roof frame in areas A and E .

3 Fit sun visor mount and fasten.

4 Inner roof frame in areas B to D and F .

5 Clean all welds with wire brush.

For reasons of stability and costs, do not grind down welds in area which is not visible.