Prepare side roof paneling

Type ar · emne 65.10 · version 0100 · 2006-10-31

Gælder for: BODY 375.810 in MODEL 375.3 with CODE (DD5) Cab with high roof BODY 375.830 in MODEL 375.1 with CODE (DD5) Cab with high roof BODY 375.840 in MODEL 375.4 with CODE (DD5) Cab with high roof BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (DD5) Cab with high roof BODY 944.899 in MODEL 944.0 /2 with CODE (DD5) Cab with high roof BODY 972.899 in MODEL 970, 972, 974, 975, 976 with CODE (DD5) Cab with high roof

Ikke tilgængelig på “da”; vises på Engelsk.

AR65.10-W-1020-02B

Commercially available tools

Number	Designation
WH58.30-Z-1002-02A	Hole punching pliers, dia. 7 mm
WH58.30-Z-1001-03A	Round wire brush, braided, dia. 70 mm
WH58.30-Z-1024-04A	Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)
WH58.30-Z-1001-40A	Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-03A	Drill (electric/pneumatic)
WE58.40-Z-1003-03A	Angle grinder (electric/pneumatic)
WE58.40-Z-1005-03A	Wet/dry vacuum cleaner

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-07A	Zinc dust paint suitable for spot welding	A 000 986 34 42

W65.10-1048-09

1 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint.

2 Drill holes in areas F to H and debur.

3 Grind connection surfaces down to bare metal in
areas A to J.

4 Grind spot welding flanges of mount (K) down to bare metal on both sides and coat insides of spot welding flanges with zinc dust paint.

5 Transfer dimension x from undamaged vehicle side to new part.

6 Coat insides of spot welding flange at side roof paneling in area K of mount (K) with zinc dust paint.

7 Fit mount (K) in area A according to determined dimension and fasten with clamping pliers.

8 Mount (K)  .