MODEL | 212.0/1 |
1 | Apply sealant to foam parts (arrows). |
P65.10-3430-06
2 | Apply 2-component adhesive in hatched areas (area E). |
Observe pretreatment of bonding surfaces. Refer to the manufacturer's information for the curing and working times of 2-component adhesive. |
P65.10-3433-04
3 | Install center roof paneling and side roof paneling (1) with spacers and fit. |
4 | Check and adjust gap dimensions. |
5 | Fix side roof paneling (1) in place. |
6 | Remove center roof paneling and spacers. |
7 | Side roof paneling (1) (areas G1, G2 and H). |
P65.10-3441-06
8 | Side roof paneling (1) (areas F1, F2 and F3). |
Perform inert gas welding in intervals, allow to cool down in between to reduce heat distortion. |
P65.10-3428-04
13 | Grind inert gas welds down flat on side roof paneling (1) (areas F1, F2 and F3). |
14 | Clean welds on side roof paneling (1). |
15 | Solder surfaces on side roof paneling (1) in areas F1, F2 and F3 with body solder and smooth. |
16 | Remove grinding and drill shavings using wet/dry vacuum cleaner. |