Set of spacer blocks
216 589 02 23 00
P65.10-3413-06
1 Install center roof paneling (1), fit with set of spacer blocks and fix in place.
Observe dimensions and position of spacer blocks from set of spacer blocks determined during removal.
2 Drill Ø 5.0 mm rivet holes in center roof paneling (1).
Drill rivet holes from bottom through spot welds predrilled during removal.
3 Remove center roof paneling (1) and set of spacer blocks.
4 Deburr rivet holes on center roof paneling (1) from both sides.
P65.10-3414-06
5 Apply 2-component adhesive in cross-hatched areas.
Observe pretreatment of bonding surfaces.
Refer to the manufacturer's information for the curing and working times of 2-component adhesive.
P65.10-3415-06
6 Install center roof paneling (1), fit with set of spacer blocks and fix in place.
7 Rivet center roof paneling (1) 4.88 steel/steel blind rivets (areas E and F).
8 Center roof paneling (1) (areas G and H).
9 Clean weld joints.
10 Remove shavings and drill chips.