ar6510p100003mex

Prepare center roof paneling for installation

Type ar · emne 65.10 · version 0100 · 2019-04-08

Gælder for: Model 167.9 except code 413 (Automatic panoramic sliding sunroof)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 65 Tag › 65.10 Tagplade — Serie 167 (modeller 9**)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.39 Tag › 35.39.30 tagplade/tagramme — Serie 167 (modeller 9**)

AR65.10-P-1000-03MEX

Prepare center roof paneling for installation

Model

167.9

except code 413 (Automatic panoramic sliding sunroof)

The higher-level service document as well as the safety information in the service document must be observed.

Prepare center roof paneling for installation

1

Prepare bonding surfaces on insides of center roof paneling (1) in cross-hatched areas (areas A).


Observe processing specifications of adhesive.



2

Grind mating surfaces in remaining cross-hatched areas on insides down to bare metal.


Grind spot weld flanges down to bare metal on both sides.



3

Remove grinding dust.



4

Coat insides of spot weld flanges with zinc dust paint.


Do not coat bonding surfaces with zinc dust paint (areas B).
Otherwise adhesion problems may occur.


Observe pretreatment of bonding surfaces.


P65.10-A057-06

Prepare center roof paneling for installation

5

Prepare bonding surfaces on inside of center roof paneling (1) in cross-hatched areas (areas C).


Observe processing specifications of adhesive.


P65.10-A058-05