Removing front section of roof paneling · ar6510d575001ts · Mercedes-Benz WIS

AR65.10-D-5750-01TS	Removing front section of roof paneling
 Danger	Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.		AS65.00-Z-0002-01A
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model

907, 910

Repair materials

Number	Designation	Order number
BR00.45-Z-1056-07A	1K-zinc dust paint	A 000 986 28 00

 The following operation steps are shown on model 907.733 with code D03 (Roof and rear-end doors, high version).

D65.10-1344-09

1.1	Model 907.6/7/8, 910.0/6 Expose weld seams on roof paneling front section (1) (areas D and E).

1.2	Model 907.1/2, 910.1 Expose spot welds on roof paneling front section (1) (areas D and E).

2.1	Model 907.6/7/8, 910.0/6 Separate weld seams on roof paneling front section (1) (areas D and E).

2.2	Model 907.1/2, 910.1 Cut off spot welds on roof paneling front section (1) (areas D and E).

3	Expose spot welds on roof paneling front section (1) (areas A, B, and C).

4	Cut off spot welds on roof paneling front section (1) (areas A, B, and C).

 Mill off spot welds through 2 panel thicknesses (area C).

5	Bend center roof paneling in front section (arrows) slightly upward.

6	Remove roof paneling section (1).

D65.10-1345-04

D65.10-1346-09

7	Sand down mating surfaces to bare metal in cross-hatched areas .

 Sand down spot weld flanges to bare metal on both sides.

8	Remove shavings and milling chips.

9	Apply zinc dust paint to insides of spot weld flanges.

as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele
as6500z000201a Livsfare ved fald fra køretøjets tag. Fare for personskade på andre personer somfølge af nedfaldende genstande ved arbejde i tagområdet