ar6410w110002a

Prepare connection points for rear wall paneling on body

Type ar · emne 64.10 · version 0103 · 2006-10-31

Gælder for: BODY 375.810 in MODEL 375.3 BODY 375.830 in MODEL 375.1 BODY 375.840 in MODEL 375.4 BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 except CODE (F20) Cab with extended rear wall BODY 944.899 in MODEL 944.0 /2 BODY 972.899 in MODEL 970, 972, 974, 975, 976 except CODE (F20) Cab with extended rear wall

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 64 Bagvæg og hæk › 64.10 Bagvæg — Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 899) · Serie 944 (modeller 0**, 2**, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.31 Bagvæg/hæk › 35.31.30 Bagvæg/hæk — Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 899) · Serie 944 (modeller 0**, 2**, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

AR64.10-W-1100-02A

Prepare connection points for rear wall paneling on body

Commercially available tools

Number

Designation

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1024-04A

Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)

WH58.30-Z-1001-40A

Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Prepare connection points for rear wall paneling on body

W64.10-1022-09

1 Align connection surfaces at rear wall paneling.

2 Grind connection surfaces down to bare metal on one side.

3 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint..

Prepare connection points for rear wall paneling on body

W64.10-1026-09

4 Separate welds in areas A and B.

5 Remove remaining flanges of reinforcements.

6 Grind connection surfaces down to bare metal on one side in area of remaining flanges.