Prepare rear right door outer sill for installation

Type ar · emne 63.30 · version 0109 · 2006-10-31

Gælder for: MODEL 901.32 /42 /62, 902.32 /42 /62, 903.02 /32 /42 /62, 904.32 /42 /62, 905.62 MODEL XD2, XD3, XD4, XD5, XD6, XD7 MODEL 903.62, 904.62 with CODE (ZU9) National version for Mexico

Ikke tilgængelig på “da”; vises på Engelsk.

AR63.30-D-0005-02A

Workshop equipment

WE58.40-Z-1001-03A	Drill (electric/pneumatic)
WE58.40-Z-1003-03A	Angle grinder (electric/pneumatic)

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-07A	Zinc dust paint suitable for spot welding	A 000 986 34 42

Prepare rear right door outer sill for installation

D63.30-0030-11

1 Draw drilling points at rear of rear right door outer sill (1) with the following dimensions:

a = 40 mm,

b = 22 mm,

c = 10 mm.

D63.30-0031-11

2 Draw drilling points at the front sill (1) with the following dimensions:

a = 35 mm,

b = 22 mm,

c = 10 mm.

3 Drill all marked holes with diameter of 6 mm dia. bit.

4 Sand sill (1) down to the bare metal on both sides in the area of the drill holes, and coat with zinc dust paint.

D63.30-0032-10

5 Sand sill (1) down to bare metal on both sides in the marked area (2) and coat with zinc dust paint.

6 Fit sill (1), align and clamp in position.