Install upper A-pillar outer paneling

AR63.20-S-1105-03P

Install upper A-pillar outer paneling

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to components when performing electric welding and soldering work

AH60.00-P-0001-02A



000 588 01 84 00 Welder

WS60.00-P-0021K



000 588 02 84 00 Welder

WS60.00-P-0022K

Model

470, 471

1

Install, fit and fix in place outer paneling on A-pillar TOP (1).

 Commercially available devices/tools
Clamping pliers (Standard)

2

Outer paneling on A-pillar TOP (1)   (areas A and B).

3

Outer paneling on A-pillar TOP (1)   (areas C and D).

 Inert gas weld in intervals and allow to cool down in between. Reduces heat distortion.

4

Face-grind inert gas welds (areas C and D).

 Commercially available devices/tools
Angular grinder

5

Clean weld joints.

 Commercially available devices/tools
Rotary wire brush

6

Remove shavings.

 Commercially available devices/tools
Wet and dry vacuum cleaner

7

Repair and smooth surfaces on outer paneling on A-pillar TOP (1).

 Different methods can be used to restore the surfaces.